Wireless Packet Info - RX/TX Errors
From DD-WRT Wiki
Wireless Packet Info
Example:
Received (RX) 72824 OK, 36413 errors Transmitted (TX) 30792 OK, 1 errors
How can one avoid all these errors?
- Do a site survey under Status->Wireless and find out what channels in your area are NOT being used and set it in your Wireless Basic configuration. Also setting the wireless Channel to Auto will dynamically config the channel and channel width. Much user friendly feature for basic users.
- Selecting an unused channel works. But one must choose a channel that is two channels (10Mhz) separated from the the adjacent occupied channel. There was still interference with one channel separation.
- The bottom line is that the high RX error rate is due to Radio interferences from the neighboring Wi-Fi, Bluetooth, cordless phones in the 2.4Ghz band and even florescent lamps. If this is happening to your AP, you may want to tweak the channel, bluetooth coexistence mode, or both.
Another important Aspect
Placing the router in the highest area possible is essential, as this will provide greater radio coverage.
For routers with external antennas, orientation of the antenna(s) is very important.
- For Single antenna models, it should be placed 90° (L Shaped) with respect to the flat side of the router.
- For Dual antenna models, the orientation should be 120° (V Shaped) with respect to the flat side of the router.
- For Multiple antenna models, they should be oriented at 45°. (W Shaped) For example, on an Asus WL500W the middle antenna should be angled at 90°, and the other antennas should be separated at 45° angles.