OM1P config

From DD-WRT Wiki

Revision as of 19:47, 20 December 2009 by Ctech4285 (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

The OM1P has a hardware watchdog that will reset the device every 5 minutes if it's not reset via a GPIO device. After you got the route flashed you have 5 minutes to configure this.

update

tested on DD-WRT v24 Beta (08/03/07) std DD-WRT v24-sp2 (10/10/09) std


go to your web interface add a custom script:


chdir / /sbin/gpio enable 3

echo "1" >/proc/gpio/3_out echo "0" >/proc/gpio/3_out

echo "1" >/proc/gpio/3_dir echo "0" >/proc/gpio/3_dir


then enable Cron under management and add this line Code:

  • /4 * * * * root /tmp/custom.sh


log into via consol or web interface and restart cron

stopservice cron && startservice cron


not sure but i think you got to do this every time you restart the device.

Retrieved from "http://wiki.dd-wrt.com/wiki/index.php/OM1P_config"