Linksys EA6300
From DD-WRT Wiki
(Difference between revisions)
Revision as of 19:42, 1 October 2018 (edit) S2s2 (Talk | contribs) (→Installation) ← Previous diff |
Revision as of 21:28, 6 May 2020 (edit) (undo) Jeremywh7 (Talk | contribs) (Finish adding info referenced from Supported Devices) Next diff → |
||
Line 1: | Line 1: | ||
- | =Hardware [ | + | '''NOTE:''' [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6300_v1 EA6300V1 hardware] with an FCC/IC ID suffix of ''EA6400'' is identical to the EA6400: see [[Linksys EA6400]]. |
+ | '''This guide covers these very similar models: EA6200, EA6300 (with EA6300 ID), EA6350v1, & EA6350v2.'''<br> | ||
+ | These use ''linksys-ea6350/'' firmware, but the EA6350v2 requires serial flash. Reference: [https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices#Linksys_.28Wireless_a.2Fb.2Fg.2Fn.2Fac.29 Supported Devices wiki].<br> | ||
+ | |||
+ | =Hardware [http://techinfodepot.shoutwiki.com/wiki/Linksys_EA6300_v0.1 Specifications]= | ||
[[Image:Linksys_EA6300.jpg|center]] | [[Image:Linksys_EA6300.jpg|center]] | ||
- | EA6400 is identical. | ||
{| border="1" cellspacing="0" | {| border="1" cellspacing="0" | ||
Line 46: | Line 49: | ||
=Installation= | =Installation= | ||
- | + | Read the [[Firmware FAQ]]: download links are in the ''Where do I download firmware?'' section | |
+ | |||
+ | '''EA6300V1''' hardware with an FCC/IC ID suffix of ''EA6400'' is identical to the EA6400, but uses '''''linksys-ea6300''''' firmware. | ||
+ | *For an FCC/IC ID suffix of ''EA6400'', see the [[Linksys EA6400]] wiki. | ||
+ | |||
+ | The following hardware uses '''''linksys-ea6350''''' firmware: see this [https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=286183 EA6350 forum thread]. | ||
+ | *''EA6300'' hardware (no labeled version) with an FCC/IC ID suffix of ''EA6300'' | ||
+ | *''EA6200'' | ||
+ | *''EA6350v1'' | ||
+ | *''EA6350v2'': <font color=darkred>'''this requires serial flash with [https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1111599#1111599 these instructions]'''</font> | ||
+ | |||
[[Category:Linksys]] | [[Category:Linksys]] | ||
[[Category:Cisco Linksys EA Series]] | [[Category:Cisco Linksys EA Series]] |
Revision as of 21:28, 6 May 2020
NOTE: EA6300V1 hardware with an FCC/IC ID suffix of EA6400 is identical to the EA6400: see Linksys EA6400.
This guide covers these very similar models: EA6200, EA6300 (with EA6300 ID), EA6350v1, & EA6350v2.
These use linksys-ea6350/ firmware, but the EA6350v2 requires serial flash. Reference: Supported Devices wiki.
Hardware Specifications
CPU | Broadcom BCM47081A0 | 800 MHz |
---|---|---|
Flash ROM | Spansion S34ML01G100TF100 | 128 MB |
RAM | Hynix H5PS1G63JFR-S6C | 128 MB |
NVRAM | 60KB | |
2.4 Ghz Radio | Broadcom BCM43217 2x2 802.11b/g/n | IEEE 802.11b (up to 11Mb/s)
g (up to 54Mb/s)/n (up to 300 Mb/s) |
5 Ghz Radio | Broadcom BCM4352 2x2 802.11a/b/g/n/ac
& two 5 GHz amplifiers | IEEE 802.11a(up to 54Mb/s)
n (up to 300 Mb/s) |
Antenna Location | Internal | 3 |
Switch | BCM47081A0 (Gigabit) | 4x GbE + 1 WAN |
USB | 1x | USB 3.0 |
Installation
Read the Firmware FAQ: download links are in the Where do I download firmware? section
EA6300V1 hardware with an FCC/IC ID suffix of EA6400 is identical to the EA6400, but uses linksys-ea6300 firmware.
- For an FCC/IC ID suffix of EA6400, see the Linksys EA6400 wiki.
The following hardware uses linksys-ea6350 firmware: see this EA6350 forum thread.
- EA6300 hardware (no labeled version) with an FCC/IC ID suffix of EA6300
- EA6200
- EA6350v1
- EA6350v2: this requires serial flash with these instructions