Hard reset or 30/30/30

From DD-WRT Wiki

Revision as of 18:40, 29 July 2008 by Redhawk0 (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Hard Reset or 30/30/30 reset

  • press and hold reset button on back of unit...hold 30 seconds with power on
  • unplug the unit still holding the reset button and wait 30 seconds
  • plug the unit back in STILL holding the reset button a final 30 seconds.

This will clear out the NVRAM and set the dd-wrt back to default values.

This procedure should be done BEFORE and AFTER every firmware upgrade/downgrade

Do not use configuration restore if you change firmware builds (different svn build numbers)