Search results
From DD-WRT Wiki
You searched for Hard_reset_or_30/30/30/fr
There is no page titled "Hard_reset_or_30/30/30/fr". You can create this page.
For more information about searching DD-WRT Wiki, see Help.
Showing below up to 20 results starting with #1.
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).
No page title matches
Page text matches
- Linksys EA6500 V1 (23,843 bytes)
7: ...s page, like the rest of the wiki, is not updated frequently. Be sure to check [https://www.dd-wrt.com...
17: ...om/betas/2017/08-03-2017-r33006/linksys-ea6500/ r33006]'''</font><br><sup>''--[[User:EA6500v1|EA6500v1...
40: | 128 MiB (Hynix H5PS5162GFR-Y5C × 2)
50: | 450 Mbps + 1300 Mbps (1750 Mbps)
110: ...-wrt.com/wiki/index.php/Linksys_EA6500_V1#Upgrade_from_the_CLI ***]</p></font> - Linksys WRT610N (11,615 bytes)
2: ... Linksys device (replaced by the [[Linksys E3000|E3000]]) with the following features:
5: * v1 300 MHz ([http://www.broadcom.com/products/Wireless-...
10: ...ind the CFE versions from within DD-WRT, run this from telnet/ssh, or use the Web GUI via "Administrat...
49: note from tmittelstaedt - this is still broken in build 3...
57: #[[Hard_reset_or_30/30/30|Hard reset]] - Asus WL-500g Deluxe (2,713 bytes)
10: #Do a proper [[Hard_reset_or_30/30/30|hard reset]]. '''Do not confuse the red 'EZ Setu...
11: #Do a second 30-30-30 reset, but do not power cycle it at the end. Thi...
16: ...r cycle the router and navigate to 192.168.1.1 (refresh until the DD-WRT GUI appears) - Netgear WNR3500L (4,176 bytes)
15: ==Installation of DD-WRT from Netgear Firmware==
18: ...a trailed build '''.chk''' to flash to the router from Netgear factory firmware.
25: *Perform a [[Hard_reset_or_30/30/30|hard reset]] on the router.
39: ...loads/betas/2020/05-05-2020-r43055/broadcom_K3X/ 43055])<br> - Installation (20,950 bytes)
23: ...ents referenced above to find out why). The user-friendly [http://www.dd-wrt.com/site/support/other-d...
33: ** Use the ''_mini'' version when upgrading from '''original Linksys firmware'''. You need the '...
49: ...With some research, you'll save hours of time and frustration.
57: ... problems you can encounter that can prohibit you from getting help, the process of reactivating and d...
67: #*[[Recover_from_a_Bad_Flash|Recover from a Bad Flash]]. - Linksys WRT54G v2.2 (1,689 bytes)
12: #Do a [[Hard_reset_or_30/30/30|hard reset]] on the router
17: ...If not successful, clear browser cache and repeat from step 6 - Firmware FAQ (40,468 bytes)
26: ....to/2PY6SRx '''TP-Link Archer C7'''] - 802.11ac (1300 + 450 Mbps), easy to recover, fairly cheap, (v2-...
29: .../2TRtcuj '''Buffalo WZR-1750DHPD'''] - 802.11ac (1300 + 450 Mbps), DD-WRT preinstalled, 512MB RAM and ...
65: ...t, and k3.10+ supports SFE accelerated NAT since 33006
73: ...'the factory-to-ddwrt file is to flash the router from OEM''' to DD-WRT. '''The webflash file is to up...
80: ...l mirror repository: http://ddwrt-kong.clonevince.fr/ '''(repository removed)''' - Reset And Reboot (4,732 bytes)
5: === Hard Reset ("30 reset")===
11: ...while the router is on, and keep holding it about 30 seconds. On different models you may see rapid fl...
15: === Hard Reset ("30/30/30 reset")===
19: [[Hard_reset_or_30/30/30|How to do a "30/30/30 reset"]]
21: ...d keep holding the reset button for an additional 30 seconds. This will wipe the nvram out. Keep in mi... - Linksys WRT54GS v5.0 & 5.1 & 6.0 (3,659 bytes)
10: ...'power cycles'' in ''How To Flash'', unplug power from the router for 10 seconds then plug back in.
15: *Download and extract ''vxworks_prep_GS_v03.bin'' from [https://download1.dd-wrt.com/dd-wrtv2/download...
19: ...Do a [[Hard_reset_or_30/30/30|hard reset]] (30/30/30)
23: ##Put the mac address from the bottom of your router in the box that says ...
29: # After booting, refresh your browser window. Clear the browser cache i... - Installation/ja (27,080 bytes)
34: ** Use the ''_mini'' version when upgrading from '''original Linksys firmware'''. You need the '...
39: ...ctly identify your router; only download firmware from that page - [[User:Clock|clock]]).
40: * Download the '''latest stable release''' from the [http://www.dd-wrt.com/dd-wrtv3/dd-wrt/down...
53: ...r or so of research, you'll save hours of time in frustration.
54: ...nd basic techniques such as [[Hard_reset_or_30/30/30]] and Tftp [http://www.dd-wrt.com/wiki/index.php/... - Linksys WRT54G2 v1.0 (18,520 bytes)
22: #Connect an ethernet cable from the computer into a LAN port of the G2v1. '''Do...
29: ...se then select "dd-wrt.v24-10709_NEWD_micro.bin" (from step 2)
47: *Micro-plus and micro-plus_ssh builds disappeared from the download site, see [https://www.dd-wrt.com/...
66: ...s. This is an altered/edited wholeflash.bin file from my virgin unit, before dd-wrt was loaded.
79: ... programs. This would allow you to install DD-WRT from almost any correctly configured OS with a tftp ... - 安装 (16,952 bytes)
13: ...ents referenced above to find out why). The user-friendly dd-wrt download page [[http://www.dd-wrt.co...
23: ** Use the ''_mini'' version when upgrading from '''original Linksys firmware'''. You need the '...
44: ...接网络。我们建议您将本页及[[Recover from a Bad Flash|从失败的刷新恢复]]、[[Firm...
52: ...[[Factory Defaults|出厂默认设置(含30/30/30硬复位大法)]]===
53: .......最好按以下介绍实施硬复位或 30/30/30 复位) - Installation/fr (33,890 bytes)
14: ...le concernant sur la page '''[[Hardware-specific/fr|Spécificités matérielles]]'''. Néanmoins, ''...
51: ...viron de recherche, vous éviterez des heures de frustration.
52: ...ialisation matérielle ou réinitialisation 30/30/30]] et tftp [http://www.dd-wrt.com/wiki/index.php/T...
56: ...ialisation matérielle ou réinitialisation 30/30/30]] avant ou après chacune des modifications appo...
77: #*[[Recover_from_a_Bad_Flash|Récupérer d'une mauvaise écritur... - Linksys E1550 (3,454 bytes)
12: | 300 MHz
27: | 300 mbps
48: # Do a [[Hard_reset_or_30/30/30|reset]]
55: # Do a [[Hard_reset_or_30/30/30|reset]]. Another power cycle after the reset migh...
67: ...initial flash instructions above if you are going from stock to dd-wrt, any other builds for upgrading... - Netgear R6400v1 (2,598 bytes)
6: The hardware is almost identical to a Netgear R6300v2, but has external antennas and different FCC a...
27: | 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz)
45: *Use the .chk file to flash from the OEM firmware GUI, then reset afterward: see...
49: '''<font color=red>DO NOT "30-30-30" Reset ARM Devices!</font>'''
53: *Select the factory reset option from the firmware upload GUI drop-down menu:<br> - Hard reset or 30/30/30 (5,274 bytes)
1: {{Languages|Hard_reset_or_30/30/30}}
19: ...r=maroon>'''DO NOT''' attempt to hard reset/30-30-30 or erase the nvram on a Linksys EA series router ...
29: .... See below for what to do: [[Hard_reset_or_30/30/30#Hard_Reset_on_ARM_and_other_newer_routers|Hard Re...
36: ==30/30/30 reset==
41: ...ess and hold the reset button on back of unit for 30 seconds - Linksys WAP54G (10,094 bytes)
65: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
72: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
96: ...eneric build (renamed to .trx extension) directly from the web GUI in the Linksys pages.
107: ...er, then perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]] on it
115: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]] - Linksys WRT54GL (7,215 bytes)
3: [[Image:linksys_wrt54gl_front_mini.jpg]]
8: *'''CPU''': Broadcom BCM5452 at 200 MHz (130nm process)
14: cpu model : BCM3302 V0.8
31: : ''Q: Why can't I directly upgrade from a stock Linksys firmware to DD-WRT versions oth...
49: ===Installation from Linksys firmware=== - Linksys WRT350N (2,519 bytes)
6: *CPU: Broadcom BCM4705 (300 MHz)
16: ... next, such as Mega.bin. Remember to do the 30/30/30 Hard Reset after every successful flash. It is ab...
21: # [[Hard_reset_or_30/30/30|Hard reset]] the router. You will not get a pass...
33: ...ng, and NEVER restore a backup configuration file from a different build, type, or router. Manually r... - Linksys WRT54GS v1.1 (1,466 bytes)
7: #Perform a [[Hard_reset_or_30/30/30]] reset
10: #[[Hard_reset_or_30/30/30]] again
20: #Wait for a steady pulse from the DMZ LED. On the third pulse (with DMZ lit) ...
21: #Hard Reset 30/30/30
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).